Halloween Milk Jug Luminaries

Get a little funky with your Halloween luminaries with help from Designer Dawn! Get the Glue Dots and a clean milk jug for a spootacular way to light up your home!

Designed by: Dawn Barrett
Time: 20 Minutes
Level: Beginner
Size: 11" x 5" x 5" inches (approx)

A spooktacular way to reuse milk jugs during the month of October. Line them along your drive way or porch to light the way on Halloween night!

Here's what you need:

• Glue Dots® Advanced Strength Adhesive or All Purpose Glue Dots
• Milk jugs, cleaned out and label removed
• Black cardstock
• Glow sticks
• Sizzix eClips electronic cutting machine
• Jack-o-lantern svg file

Here's what you do:

1. Use your electronic cutting machine to cut out a jack-o-lantern face out of black cardstock for each luminary.
2. Fill your clean jug 2/3 up with water and screw on the lid. Dry off the outside of the jug completely before the next step.
3. Using Advanced Strength, apply the jack-o-lantern face onto the side of the milk jug. Make sure the handle is to the back and not the side of the face.
4. When night falls, crack a glow stick and add it to the inside of the luminary.

Tips:

• Goo Gone works well at removing stickers.
• Nail Polish Remove will take off the date that is printed directly onto the jug.
• Use a funnel to add extra water after the jack-o-lantern face has been applied.

~Dawn

This project can be completed with either of the following:

Advanced Strength products can be purchased at: