Solutions That Stick.

Staying on top of important changes from the U.S. Department of Labor's Occupational Safety and Health Administration (OSHA) is an important part of business. It is our responsibility as a manufacturer to make sure our customers and...

Whether your application is consumer packaging, beverage packaging, material handling, or forward-facing placement, handheld applicators for administering adhesives are useful. When it comes to applying our Glue Dots Brand Adhesives,...

Last week, we discussed how water-based adhesives can be adversely affected by the cold and changing temperatures through transport. Today, we’re going to discuss the opposite end of the temperature spectrum and discuss how you can...

Whether you’re using a water-based adhesive or a hot melt adhesive, there are three different environments that can adversely affect the adhesive’s structure and performance: cold weather, excess heat, humidity. Today, we’re going to...

In our last two blogs, we did our best to show that Glue Dots adhesives are superior to adhesive tape and hot melt adhesive. For the final blog in this series, we will be taking on a classic: liquid glue.

Part 3 - Glue Dots Adhesives...

In our previous blog, we made the case for why Glue Dots Brand Adhesives are superior to standard adhesive tape. This time around, we will compare and contrast our product with hot melt adhesive (HMA).

Part 2 - Glue Dots Brand...

We’re often asked about what the differences are between Glue Dots Brand adhesives and some of the other types of adhesive solutions on the market. It might be easy to just claim, “Our product is the best”. But, perhaps it is best to...

All of us at Glue Dots International (GDI) are excited about launching a new blog. For almost 20 years, GDI has been developing and manufacturing the world’s most innovative adhesive solutions. In fact, there is a good chance you’ve...

Carrier case failure is a multi-million dollar problem for the beverage industry, resulting in countless returns to re-pack centers, and higher labor and transportation costs for manufacturers and distributors. The first question for...